Landlord gas safety checks explained for England
Everything Middlesbrough and Teesside landlords need to know about annual gas safety checks, what they cover and how to book with a Gas Safe engineer.

What is a landlord gas safety check?
If you rent out a property in Middlesbrough or anywhere on Teesside, and it has gas appliances, you have a legal duty to keep them safe. In England that means arranging a gas safety check every year on the gas appliances, flues and pipework in the property.
The check must be carried out by a Gas Safe registered engineer. Not someone who simply says they work on gas, but an engineer whose registration you can verify on the Gas Safe Register website.
What does the engineer check?
The engineer works through the gas appliances provided for the tenants. In most rental homes that means the boiler, and it can include a gas hob or a gas fire if the property has one. The check covers things like:
- Whether each appliance is operating safely
- Whether the flue is clear and the combustion products are venting properly
- Whether there are any gas leaks
- Whether the appliance has adequate ventilation
- Whether the appliance is burning correctly and not producing dangerous carbon monoxide
At the end, a gas safety record is issued. It sets out the date of the check, the appliances inspected, any defects found and whether each appliance is safe to use.
What happens after the check?
Once you have the gas safety record, you need to give tenants a copy and keep your own. New tenants should have a copy before they move in. Rules and timings can change, so landlords should always check the current government guidance on gas safety in rented homes.
If a fault is found, it is explained clearly. An appliance that is unsafe should not be used until it has been repaired or made safe. Tenants' safety comes first.
Why the annual check matters
Some landlords treat it as a box to tick. It is much more than that. Carbon monoxide is colourless and odourless, and a faulty or poorly ventilated gas appliance can produce it with no visible warning. People are seriously harmed by carbon monoxide poisoning in homes every year, often from appliances that looked fine.
A gas safety check looks for problems you cannot see, such as incomplete combustion, a blocked flue or poor ventilation. These need proper testing equipment and the knowledge to interpret the results.
Carbon monoxide alarms
Landlords have duties around carbon monoxide alarms in rented homes, and the rules have changed in recent years. Check the current government guidance for exactly what applies to your property. Whatever the minimum is, a working alarm near gas appliances is a sensible safeguard, and alarms should be tested regularly and replaced before they expire.
Is a gas safety check the same as a boiler service?
No. They are different things, even though both involve a Gas Safe registered engineer looking at your boiler.
- A gas safety check is a safety inspection. It asks whether the appliance is safe to use. For landlords it is a legal requirement.
- A boiler service is maintenance. It looks at how the boiler is performing, checks components for wear and helps spot problems before they become breakdowns.
The two can sometimes be done at the same visit, but they have different purposes. Our boiler servicing page explains what a service covers, and our guide to why autumn matters for a boiler service goes into more detail.
Rental homes on Teesside
Middlesbrough and Teesside have a mix of rental property, from Victorian and Edwardian terraces to inter-war semis and newer estates. Older homes can have older boilers, original pipework and changed ventilation, for example air bricks that have been blocked over the years. Ventilation matters for gas appliances, and it is something an engineer will look at.
If your rental property has an older boiler, it is worth talking about its condition. An honest picture of where it stands helps you plan ahead.
How to check an engineer is Gas Safe registered
Before any gas work starts in your property:
- Ask to see the engineer's Gas Safe ID card
- Check their registration on the Gas Safe Register website
- Check the card shows they are qualified for the type of work being done
A genuine engineer will not mind being asked. A gas safety record issued by someone who is not registered is not valid, and gives you no assurance the work was done safely. We are a Gas Safe registered business, and you are welcome to check.
When to book
The check is needed every year, so it helps to book it around the same time each year so it does not slip. Many landlords arrange it before the heating season starts, so that if the boiler needs attention there is time to sort it. For a new tenancy, have the gas safety record in place before the tenant moves in.
If tenants mention cold radiators or uneven heating, look into it at the same time. Our guide on why radiators go cold and how to bleed them covers common causes.
Frequently asked questions
Do I need a gas safety check every year, even if nothing has gone wrong? Yes. In England, landlords must arrange an annual gas safety check regardless of whether problems have been reported. It is there to catch issues that are not obvious, including carbon monoxide risks.
Can any plumber carry out the check? No. It must be a Gas Safe registered engineer. Always ask to see their ID card and check their registration on the Gas Safe Register.
What happens if a fault is found? It is explained clearly, and an appliance found to be unsafe should not be used until it has been repaired or made safe.
What should I do if I smell gas? Turn off the gas at the meter if it is safe to do so, open doors and windows, avoid switches and naked flames, and call the National Gas Emergency Service on 0800 111 999.
If you are a landlord in Middlesbrough or on Teesside, see our page on landlord gas safety inspections, call 07710 444026 or use the enquiry form.

